|
Location: View  Verification
Overview:
Use this view to track the verification activities performed in the assets that are associated with a verification plan.
Specific buttons:
|
Click on this button to view the data of the verification selected in the list of records.
|
|
Click on this button to view the verifications displayed in the list of records in a Gantt chart.
|
|
Click on this button to use the Analytics resource to analyze the result obtained from the search.
|
|
Click on the arrow next to this button to configure and issue the desired activity blank form, activity form, calibration certificate, calibration results and blank data collection reports. This button also allows exporting the list of records displayed on the main screen to an Excel file, configuring a new report or associating an existing report, and also searches for the parameters that can be used in the configuration of new reports.
|
|
Click on the arrow placed on the right side of the button to change the screen layout to 3 quadrants. The details of the verification selected in the list of records of the second quadrant will be displayed in the third quadrant.
|
|
Click on the arrow placed on the right side of the button to change the screen layout to 2 quadrants.
|
Use the filters described below to locate the desired records through specific information. To do that, go to the Search filters panel and click on the  button to add them.
For further details on the "Search panel" and other view operations, refer to the Views section.
|
Use this filter to select an attribute that will be displayed as a column in the search listing, allowing its value to appear in line with the verification activity. To do that, click on the Add attribute in the result button and select the attribute of the downtime record reason you wish to search. To add more than one attribute in this search, use the Add option at the bottom of the panel and repeat the procedure described previously. After adding the desired attributes, click on the Apply button.
|
Asset: Select the asset related to the verification activity you wish to search.
ID #: Enter the ID # of the asset related to the verification activity you wish to search.
Name: Enter the name of the asset related to the verification activity you wish to search.
Asset status: Expand the list and check the options that correspond to the possible steps in which the asset may be: Verification, Calibration, Maintenance, Disabled, Available, Usage event, Maintenance event or Calibration event. Use the other buttons next to the field to check all available options and clear the checked options.
Serial number: Enter the serial number of the asset related to the verification activity that you wish to search.
Specification: Expand the list and check the options corresponding to the possible specification of the asset related to the verification activity you wish to search.
Responsible team: Select the responsible team for the asset related to the verification activity you wish to view.
Gage owner: In the Type field, select the desired option to locate assets from the organization (internal) or from another organization (third-party) or both. If the "External" option is selected, in the respective field, select the Company that owns the asset.
Condition: Use the fields in this section to locate the assets under determined condition associated with verification, maintenance or calibration activities. To do that, enter the ID # and the name of the asset condition or select the desired condition.
Location: Use the fields in this section to locate assets that belong to a certain location, associated with verification, maintenance, or calibration activities of assets that belong to a certain location or that are with a certain user.
|
Click on the Add attribute button and select the attribute associated with the type of the asset related to the verification activity you wish to search, the operator and a value for it. To use more than one attribute in this search, use the Add attribute option in the bottom of the panel and repeat the procedure described previously. After adding the desired attributes, click on the Apply button.
|
ID #: Enter the ID # of the plan to which the verification activity you wish to view belongs.
Name: Enter the name of the plan to which the verification activity you wish to view belongs.
Responsible team: Select the team responsible for the plan to which the verification activity you wish to view belongs.
Deadline: Expand the list and check the options corresponding to the possible deadline status of the plan to which the verification activity you wish to view belongs. Use the other buttons next to the field to check all options on the list and clear the checked options.
Priority: Use the fields to locate the verification activity you wish to search through the result and the index of the priority of the plan to which it belongs.
Date-based frequency: Use the fields in this section to locate the verification activity through the configuration of the date-based frequency of the plan. In this case, select the frequency type that was used and/or enter the number of the "unit" with which the plan is executed.
Meter-based frequency: Use the fields in this section to locate the verification activity through the configuration of the meter-based frequency of the plan. In this case, enter the value range that covers the value configured in the plan you wish to search.
Status: Expand the list and check the options corresponding to the status (active or inactive) of the plan to which the verification activity you wish to search belongs.
Due date: Select the date range that covers the due date of the plan to which the verification activity you wish to search belongs.
Last execution: Select the date range that covers the date of the last execution of the plan to which the verification activity you wish to search belongs.
Service center: Select the service center related to the plan to which the verification activity you wish to search belongs.
Responsible technician: Select the responsible technician related to the plan to which the verification activity you wish to search belongs.
|
Enter the ID # and/or the name of the standard activity that started the verification activity that will be viewed.
|
ID #: Enter the ID # of the verification activity you wish to search.
Status: Expand the list and check the options that correspond to the possible status of the verification activity you wish to search: Planning, Programming approval, To be started, Execution, Execution approval, Closed or Cancelled. Use the other buttons next to the field to check all available options and clear the checked options.
Priority: Use the fields to locate the verification activity you wish to search through the result and the index of its priority.
Responsible team for planning: Enter the responsible team for the planning of the verification activity you wish to search.
Responsible team for the execution: Select the team responsible for the execution of the verification activity you wish to search.
Executor: Enter the executor of the verification activity you wish to search. Use the other buttons on the side of the field to fill it out with the logged user data or clear it.
Plan: Enter the plan that has the verification activity you wish to search.
Activity classification: Expand the list and check the options corresponding to the possible classification set for the verification activity you wish to search.
Service center: Select the service center related to the verification activity you wish to search.
Responsible technician: Select the responsible technician for the verification activity you wish to search.
Defects: Enter the defect associated with the verification activity you wish to search.
Cause: Enter the cause of any defect associated with the verification activity you wish to search.
Linked activity: Enter the maintenance activity associated with the verification activity you wish to search.
|
Programming approver: Select the approver of the verification activity to be viewed.
Execution approver: Select the approver of the verification activity to be viewed.
Programming approval route: Select the approval route of the verification activity to be viewed.
Execution approval route: Select the approval route of the verification activity to be viewed.
|
Planned start date: Enter the period that covers the planned start date of the verification activity.
Planned end date: Enter the period that covers the planned end date of the verification activity.
Actual start date: Enter the period that covers the actual start date of the verification activity.
Actual end date: Enter the period that covers the actual end date of the verification activity.
|
Click on the Add attribute button and select the attribute associated with the standard activity that originated the verification activity you wish to search, the operator and a value for it. To use more than one attribute in this search, use the Add attribute option in the bottom of the panel and repeat the procedure described previously. After adding the desired attributes, click on the Apply button.
|
Use this filter to locate the verification activities of a particular service center. To do that, click on the Add button and select the desired service center. To add more than one service center in this search, use the Add option at the bottom of the panel and repeat the procedure described previously. After adding the desired attributes, click on the Apply button.
|
Type: Select the occurrence type that was associated with the activity you wish to search. The occurrences can be: Workflow, Action plan, Incident, Problem and Isolated action.
ID #: Enter the ID # of the occurrence.
Title: Enter the title of the occurrence.
|
After you complete the necessary filters, click on the SEARCH button on the Search filters panel or press ENTER on the keyboard to perform the search. The result will be displayed on the right side of the view screen.
|
|
