Associating a standard directly in the calibration
Associating a standard directly in the calibration |
|
|
If, in the general parameters, the Associating standard directly in the calibration option is selected, the standard will be selected according to the service center (configured in the standard activity) that will perform the calibration (internal or third-party):
If the service center is internal1.When clicking on the
2.Fill in the filters and click on the
3.Select the desired standards and click on the
If it is a third-party service center1.When clicking on the
2.To associate an existing standard, fill in the filters and click on the
3.If the used standard is not saved in the system, it will be necessary to create a new standard. To do that, click on the ID #: Enter the number or code that identifies the standard. Name: Enter the name of the standard. Certificate: Enter the number of the standard calibration certificate. Laboratory: Select the laboratory responsible for the standard. Uncertainty: Enter the external factors that influence in the measurement of the standard. Certificate date: Enter the certificate date of the standard. Calibration due date: Select the calibration due date of the standard. Primary standards: Enter the standards used to calibrate the standard in question.
4. |
button of the 
button. The system will display the assets that were calibrated with the plan defined in the standard activity of the calibration in execution.
button to save the calibration standard(s).
Select the desired standards and click on the