Creating process simulations |
To create a process simulation, execute the following steps:
1.Access the Management Process simulation menu.
2.On the main screen toolbar, click on .
3.On the screen that will be displayed, enter an ID # and a name for the simulation.
4.Fill out the following fields in the Configuration tab: # of readings: Enter the number of readings to be made on each sample. # of samples: Enter the number of samples that will be collected. Limits: Select the limit type for the specifications: ▪Bilateral: Will define the upper and lower limits of the specification. ▪Unilateral up: Will only define the upper limit of the specification. ▪Unilateral down: Will only define the lower limit of the specification. Decimal places: Enter the number of decimal places that will be used in the readings of the characteristic. Measurement unit: Select the measurement unit that will be used in the measurement. Nominal value: Enter the expected value for the variable characteristic in question. Upper tol.: Enter the acceptable value above the nominal value for the process to be considered under statistical control. Through this tolerance, the system automatically calculates the USL - Upper specification limit for the characteristic in question. Lower tol.: Enter the acceptable value below the nominal value for the process to be considered under statistical control. Through this tolerance, the system automatically calculates the LSL - Lower specification limit - for the characteristic in question. Edit simulation after saving: Check this field for the system to display the process simulation screen after saving and closing the data screen of the simulation in question.
Save the record.
|