|
To edit the data of an audit template, locate and select the desired template in the main screen list of records. After that, click on the  button on the toolbar.
At this point, the system will display the audit template data screen. The following sections will be available for editing:
The fields in this section will be displayed completed as entered during the addition of the template, and they can be edited, such as identification, schedule, and responsibility data. See further details in the Configuration  Audit Category section.
|
According to the scope defined in the category, the scope may be defined in the following way:
General
General
|
Audited business unit
|
This field will not be available when the audit type is 2nd party (supplier). Select the business unit that will be audited. If no unit is selected, the audit will not be restricted to a specific unit.
|
Audited company representative
|
Select the representative of the business unit or supplier company that will be audited. This representative is the link between the auditors and the party being audited, that is, this person accompanies the auditor during the audit and is available in case of questions or needs.
|
Supplier
|
This field will only be available for 2nd party (customer) audits. Select the supplier company that will be audited. If no supplier is selected, the audit will not be restricted to a specific supplier.
|
Scope period
|
Select the start and end respective dates.
|
Scope
|
Use this field to record important information about the scope of the audit.
|
Requirement
Through this section, it is possible to associate the requirements (SE Requirement) by using the association wizard. These requirements will be defined as scope of the audits based on this template. To associate, click on the  button and follow the steps in the association wizard.
|
Click on this button to associate requirements with the scope structure. See more details in the Audit scope definition section.
|
|
Click on this button to view the requirement structure tree. Select the record before clicking on the button.
|
|
Click on this button to unblock a requirement that is being edited. Select the blocked requirement before clicking on the button.
|
|
Click on this button to generate reports related to the structure requirements.
|
Object
According to the scope configurations performed in the audit category, the following sub-sections may be available in the scope:
▪For 1st party, 2nd party (customer) and 3rd party audits, these sections may be available to be filled: "General", "Process", "Department", "Control", "Product", "Asset", "Supply", "Project", and "Interviewee". ▪For 2nd party (supplier) audits, these sections may be available: "General", "Product", "Asset", "Supply", and "Interviewee".
See below how to perform associations according to the corresponding object:
Object
|
Process
|
It is possible to associate the processes (SE Process) that will be audited. For this and other operations, use the following buttons on the side toolbar:
|
Click on this button and, on the screen that will be displayed, select the process and, if you wish, a specific task of that project to be audited.
|
|
Click on this button to disassociate a process. Select the desired record before clicking on the button.
|
|
Click on this button to view the process data. Select the desired record before clicking on the button.
|
|
Click on this button to view the process flowchart. Select the desired record before clicking on the button.
|
|
Click on this button to view the process structure tree. Select the desired record before clicking on the button.
|
|
Department
|
Used to associate the business units (SE Administration) that will be audited. For this and other operations, use the following buttons on the side toolbar:
|
Click on this button to associate the department of the business unit that will be audited.
|
|
Click on this button to disassociate the department. Select the desired record before clicking on the button.
|
|
Control
|
Used to associate the risk and control analyses (SE Risk) that will be audited. For this and other operations, use the following buttons on the side toolbar:
|
Click on this button to associate the control analysis that will be audited. On the screen that will be displayed, locate and select the desired record.
|
|
Click on this button to delete the control association. Select the desired record before clicking on the button.
|
|
Click on this button to edit the control analysis data. Select the desired record before clicking on the button.
|
|
Product
|
Used to associate the items (SE PDM) that will be audited. For this and other operations, use the following buttons on the side toolbar:
|
Click on this button to associate the item that will be audited. On the screen that will be displayed, locate and select the desired record.
|
|
Click on this button to disassociate the item. Select the desired record before clicking on the button.
|
|
Click on this button to view the item data. Select the desired record before clicking on the button.
|
|
Asset
|
Used to associate the assets (SE Asset) that will be audited. For this and other operations, use the following buttons on the side toolbar:
|
Click next to this button and select the desired option:
Asset: Select the assets to be audited. On the selection screen that will be displayed, locate and select the desired assets.
Location: On the selection screen that will be opened, locate and select the location to which the assets to be audited belong. All assets in this location will be audited.
|
|
Click on this button to delete the process association. Select the desired record before clicking on the button.
|
|
Click on this button to view the asset data. Select the desired record before clicking on the button.
|
|
Supply
|
Used to associate the supplies (SE Supply) that will be audited. For this and other operations, use the following sidebar buttons:
|
Click on this button and select the desired option:
▪Supply: Allows selecting only the supply, for it to be possible to audit all the storerooms in which it is located. For example: When selecting the "XYZ light bulb" supply, all the storerooms that have the supply associated with them will be audited. Press the CTRL or SHIFT key on the keyboard to select more than one record at a time. Remember that only the records that are active in the system or in the last revision will be available for selection. ▪Supply per storeroom: Allows selecting the supply and its respective storeroom. For example: only the "XYZ light bulbs" in the "Central" storeroom will be audited. Remember that only the records that are active in the system or in the last revision will be available for selection. ▪Storeroom: Allows auditing all the supplies in a determined storeroom. Remember that only the records that are active in the system will be available for selection. |
|
Click on this button to disassociate a record. Select the desired record before clicking on the button.
|
|
Click on this button to view the record data. Select the desired record before clicking on the button.
|
|
Project
|
Used to associate the projects and tasks (SE Project) of the organization that will be audited. For this and other operations, use the following sidebar buttons:
|
Click on this button and select the desired option:
▪Project: Allows associating the project that will be audited. ▪Project task: Allows associating the specific project tasks that will be audited. |
|
Click on this button to delete the project or task association. Select the desired record before clicking on the button.
|
|
Click on this button to view the project data. Select the desired record before clicking on the button.
|
|
|
Scope
Through this section, it is possible to associate the requirements (SE Requirement) by using the association wizard. These requirements will be defined as scope of the audits based on this template. To associate, click on the button and follow the steps in the association wizard.
|
Click on this button to associate reference requirements with the scope structure. See more details in the Audit scope definition section.
|
|
Click on this button to open the screen with the requirement structure. See further details in the Requirement structure assembly section.
|
|
Click on this button to unblock the requirement selected in the list of records that is being edited.
|
|
Click on this button to generate reports related to the structure requirements.
|
Description
The following fields will be available for completion:
Scope period: Select the start and end dates of the scope.
Scope: Use this field to record important information about the scope of the audit.
|
|
Enter the value of the attributes that were associated in the category and that complement the audit being planned. Those attributes that are required must necessarily have their values filled in. The way to fill in an attribute varies according to the configurations set when creating it.
|
This section will only be displayed if the category is configured with the approval step. In that case, define the parties responsible for the approval of the audit steps. To do that, in the corresponding steps, fill out the following fields:
Fields
|
Responsibility route
|
Select, among those saved in the system, the route responsible for the approval. If needed, use the buttons placed next to the field to configure a new responsibility route or clear the value entered in the field, respectively.
|
Approval type
|
▪Incremental: The step may be approved/rejected by any member of the responsibility route. ▪Circular: The step will have to go through all the members of the responsibility route and only the last member in the sequence may approve/reject it. |
Cycle
|
This field is filled out by the system with a sequential number indicating the approval cycle that the step is going through. Each time the step is rejected and goes through approval again, the system assigns a number to it. Select the previous cycles to see the members of the responsibility route that approved the step in question.
|
Wait for all members approval
|
Check this option for the approval step to be released only after all the members of the route execute their tasks.
|
If in the audit category it is set that the route type will be Variable, on the toolbar next to the list of records, the following buttons will be enabled:
|
Click on this button to add a new member to the responsibility route. Refer to the Configuring a responsibility route section to obtain a detailed description on how to add a new member. It is important to point out that, if the member is being added to a route associated with the audit category, it will only be valid for the step approval, not being replicated to the responsibility route record created through the Configuration Responsibility route menu.
|
|
Click on this button to edit the data of a member. Select the desired record before clicking on the button.
|
|
Click on this button to delete a member from the responsibility route. Select the desired record before clicking on the button.
|
|
In this section, those responsible for the audit execution are defined. To do that, select one of the following options:
Responsible for the execution
|
Internal auditor
|
The audit will be performed by the people of the company that will be audited. In that case, use the buttons next to the list of records in this section to select the desired auditors.
|
Audit business unit
|
The audit will be performed by people of a particular business unit of the company. For that, first select the business unit and then use the buttons next to the list of records to select the desired auditors. Remember that the system will only list the auditors of the selected business unit.
|
Audit organization
|
The audit will be performed by external auditors, that is, the auditors of an audit organization. For that, first select the organization and then use the buttons next to the list of records to select the desired auditors. Remember that the system will only list the auditors of the selected organization.
|
For '2nd party - Customer' and '3rd party' audits, only the 'Audit organization' option will be available.
|
|
Attachment
|
In this section, it will be possible to add, delete, download and view the attachments related to the audit template. For further details on how to add attachments to the record, see the Adding attachments section.
|
Document
|
In this section, it will be possible to add, delete, download and view the electronic file and the data of the documents related to the audit template. For this resource to work correctly, it is necessary for the SE Document component to be a part of the solutions acquired by your company. Refer to the Adding documents section for further details on how to add and/or associate documents from SE Document.
|
|
In this section, it is possible to view the history of the steps the audit already went through. It is also possible to view the comments on the audit status change, if any, as well as adding new comments on each of the previously recorded steps.
|
Check the Requires tracking option for the system to track all the occurrences and incidents associated with the audits of this template. After that, fill out the following fields:
Occurrence tracking
|
Responsible team
|
Select the team that will be responsible for tracking the occurrences associated with the audit. Use the other buttons next to the field to create a new team and clear the filled out value. The members of the selected team will receive the Occurrence tracking task.
|
Deadline (days)
|
Enter the number of days for the closure of all occurrences associated with the audit.
|
|
|
