Watermark operations (DC045) |
SoftExpert Document allows configuring watermarks to be applied, in specific situations, to the electronic files of the created documents. This section will cover the following operations:
▪Editing a watermark configuration ▪Adding a watermark configuration ▪Adding a text item to the watermark ▪Configuring a QRCode as a watermark ▪Defining the information type that will be displayed in the watermark ▪Importing watermark items from other statuses
The watermark configuration is usually performed in the SE Document component, accessing the Configuration Watermark (DC045) menu. The list of records displays the "Default metadata" metadata export configuration (previously configured by the system), as well as the other existing metadata configurations.
Editing a watermark configurationIt is possible to edit an existing watermark configuration through the following SE Document menus/screens: ▪Through the Configuration Watermark (DC045) menu. In this case, in the list of records, select the desired metadata export. ▪Through the data screen of the category with which the watermark configuration is associated. In this case, access the Details Electronic file General Watermark tab. It will be possible to edit the watermark selected in the Configuration field. To perform this operation, the logged user must have the "Edit" control enabled in the category security list.
To do that, perform the following steps: 1.Click on the button.
2.On the data screen that will be opened, select the document status to which you wish to configure a watermark in the left panel of the General tab.
3.On the right side of the screen, edit the desired information: the watermark printing area margin and the information of the items that will compose it, as well as its positioning. See below, in this section, the description of the fields and information types available for configuration in the watermark.
4.Save the record. The changes will be applied to the categories with which the watermark is associated and consequently to the documents.
Adding a watermark configurationIt is possible to add a watermark configuration through the following SE Document menus/screens: ▪Through the Configuration Watermark (DC045) menu. ▪Through the data screen of the category with which the watermark configuration is associated. In this case, access the Details Electronic file General Watermark tab. It will be possible to edit the watermark selected in the Configuration field. To perform this operation, the logged user must have the "Edit" control enabled in the category security list.
To do that, perform the following steps: 1.Click on the button.
2.On the screen that will be opened, enter an ID # and a name for the watermark configuration.
3.Save the record.
4.On the left panel of the General tab, the system will display all statuses of a document to which the watermark feature is applied. Select the status to which the desired watermark will be applied. The statuses may be:
a - The configuration performed in this section will only be applied to documents whose revision process is "ISO9000 based" and that are in the step in question. For revisions via "Workflow", the watermark that will be used is associated in the activity status. See further details in the Watermark in electronic files under revision via Workflow section.
b - When the system converts the electronic files of the documents that have the watermark associated, the configurations performed in this section (if any) are only applied to their last page.
5.Fill out the Top, Bottom, Left and Right fields in the Margin section with the values that will limit the printing area of the watermark in millimeters. That is, the watermark items will be placed within the limits established in these fields on the page of the file to which it will be applied.
6.In the listing at the bottom of the screen, add the items with the information that will be displayed as a watermark in the files of the documents with this configuration applied. It is also possible to import the items configured in another document status. For these operations, as well as to edit and delete the item selected in the listing, use the buttons on the side toolbar. See below, in this section, the description of some of these operations.
7.Save the record. To use this configuration, it must be associated with the category of the documents to which the watermark will be applied.
Adding a text item to the watermarkTo add a text to be displayed as a watermark, in the listing at the bottom of the desired document status, perform the following steps: 1.Click on the button on the side toolbar of the listing.
2.On the screen that will be opened, select the alignment of the item regarding the margin printing area: top, middle, bottom + left, center, right.
3.Then, select the Text option.
4.Fill out the following fields according to the format you wish to apply to the text: ▪Font: Select the text font that will be used in the watermark. ▪Size: Enter the size of the font that will be used in the watermark text. ▪Color: Select the color that will be used in the watermark text. ▪Rotation: Select the orientation that will be applied to the watermark text: horizontal, vertical or diagonal. ▪Bold / Italic / Underline / Strikethrough: Check the options you want to apply to the watermark text.
5.Save the record, but do not close the data screen.
6.In the Text item tab, click on the button on the side toolbar.
7.On the screen that will be displayed, select the information type that will be displayed in the watermark. See a detailed description of the types available for selection in the Defining the information type that will be displayed in the watermark topic below.
8.Fill out the field that may be displayed according to the selected information type. See a detailed description of the fields that may be displayed for completion in the Defining the information type that will be displayed in the watermark topic below.
9.Enter the item presentation sequence in the watermark.
10.Save the data. At this point, the item will be displayed in the listing of the "Text item" tab.
11.After performing the configurations above, save the watermark item data.
Configuring a QRCode as a watermarkTo add a QRCode to be displayed as a watermark, in the listing at the bottom of the desired document status, perform the following steps: 1.Click on the button on the side toolbar of the listing.
2.On the screen that will be opened, select the alignment of the item regarding the margin printing area: top, middle, bottom + left, center, right.
3.Then, select the QR Code option.
4.Save the record, but do not close the data screen.
5.In the Text item tab, click on the button on the side toolbar.
6.On the screen that will be displayed, select the information type that will be displayed after reading the QRCode. See a detailed description of the types available for selection in the Defining the information type that will be displayed in the watermark topic below.
7.Enter the item presentation sequence after reading the QRCode.
8.Save the data. At this point, the item will be displayed in the listing of the "Text item" tab.
9.After performing the configurations above, save the watermark item data.
Defining the information type that will be displayed in the watermarkWhen adding an item to the watermark, the following options will be available for selection in the Type field:
1 - Available only if the status to which the watermark is being configured is "Conversion to PDF".
Importing watermark items from other statusesTo use the watermark items configured in a certain document status in another status, perform the following steps: 1.On the left panel of the General tab, select the status of the document to which you wish to apply the watermark items.
2.Click on the button on the side toolbar of the list of records at the bottom of the screen.
3.On the screen that will be opened, select the status of the document from which you wish to copy the watermark items in the From field. The To field will be filled out with the document status selected in step 1.
4.Save your selection. At this point, the listing will display the watermark items imported from the other status. |