Navigation:  Execution > Meter reading >

Performing meter readings

Previous  Top  Next

See how to perform the meter reading of an asset:

 

1.In the list of records of the second quadrant, locate and select the desired asset.

 

Only the assets whose meter reading frequency is defined through the SE Asset component will be available. That is, when the "Meter reading" control is configured in the asset data.

 

2.Click on the new button, located in the third quadrant, to enter the values obtained in the meter reading. At this point, the meter reading data screen will be displayed:

 

dados_leitura_medidor

 

Asset: This field is automatically filled by the system with the name of the asset in which the meter is being read.

Revision: This field is automatically filled by the system with the revision number of the asset in which the meter is being read.

 

3.On the Reading tab, enter the data of the meter reading:

Number: This field is automatically filled by the system with the meter reading number.

Date: Date on which the meter reading was performed. The system automatically enters the current date, but it may be edited if needed.

Time: Meter reading time. The system automatically enters the current time, but it may be edited if needed.

Value: Enter the value obtained in the meter reading.

Meter setting value: This field will be displayed filled with the asset meter setting value.

 

4.On the History tab, the system displays the readings already made in the asset meter.

 

5.Save the reading data after entering the necessary data.