Schumacher frequency |
Location: Configuration Schumacher frequency
Prerequisites: ▪None.
Overview: The Schumacher frequency is in the method used to optimize the calibration frequency. By means of this frequency, the assets are classified according to their condition, taking into account the history table in which the revalidation conditions are entered. Once the calibration frequencies are defined and with the calibration in progress, after a few cycles, it is possible to adjust the frequency, based on the results of previous calibrations. For that, we recommended using the Schumacher table. This table is classified in Occurrences and Frequency. To switch between them, use the field in the upper right corner of the main screen. From the third calibration, the frequency is automatically adjusted according to the measurement results, considering the procedure.
Specific buttons:
|