In the event of variable characteristic: Enter, in the respective field, (2) the value obtained in the reading of the characteristic. The following information will be available for this type of characteristic:
▪Cycle: This section represents the reading cycle. Reading can have more than one cycle, according to the sampling plan configured for the inspection in question. ▪Sample size: This field displays the sample size to be read. ▪Ac: This field displays the number of items that can be accepted, regarding the sampling rule configured for the inspection. ▪Re: This field displays the number of items that can be rejected, regarding the sampling rule configured for the inspection. ▪PPM: In this field will be displayed, after entering the reading data, the result of the calculation of the PPM (Part per million) obtained from the inspection of the characteristic. In the event of attributive characteristic: Enter, in the respective fields the (Defective items and rejected items), the values obtained with the characteristic reading. The following information will be available for this type of characteristic:
▪Cycle: This section represents the reading cycle. Reading can have more than one cycle, according to the sampling plan configured for the inspection in question. ▪Sample size: This field displays the sample size to be read. ▪Defective items: Enter the number of sample defective items. This number may not exceed the size of the sample. ▪Rejected items: Enter the number of sample rejected items. This number may not exceed the number of defective items. ▪Ac: This field displays the number of items that can be accepted, regarding the sampling rule configured for the inspection. ▪Re: This field displays the number of items that can be rejected, regarding the sampling rule configured for the inspection. ▪Defects: In this section must be entered the number of each defect displayed in the characteristic, along with the respective comments. ▪PPM: In this field will be displayed, after entering the reading data, the result of the calculation of the PPM (Part per million) obtained from the inspection of the characteristic. |