Navigation: Execution > Calibration execution >

Create running calibration activity

Locate the plan whose calibration activity will be created.

The asset calibrations will only be successful under the following conditions:

▪The calibration control must be properly configured in SE Asset through the asset data screen.

▪The asset must be available and with its latest revision approved.

▪The asset may not be checked-out for calibration.

Click on the button, located in the third quadrant, to create a new calibration activity. If the selected plan has calibration activities to start, the system will ask whether the user wants to edit the calibration activity data so that it is possible to change the execution of the calibration activity.

On the screen that opens, fill in the following fields in the General data General data section:

Execution: In this section, the fields related to the execution of the calibration activity must be filled in.

▪Start: Enter the calibration start date.

▪Time: Enter the calibration start time.

▪Actual %: Enter the calibration percentage already performed. When creating an activity in the execution step, the user needs to report a value greater than 1. To keep the activity running, a value between 1 and 99 must be entered. If this field is filled in with 100%, the activity execution will be finished.

▪Responsible team: This field will be filled with the team defined in the plan for the execution of the activity.

Responsible technician

▪Service center: Select the service center responsible for performing the calibration of the assets of this activity.

▪Responsible technician: Select the technician responsible for performing the calibration of the assets of this activity. Only the technicians of the service center selected before will be available for selection.

After you have completed all required fields, the calibration activity data can be saved for the first time. To do that, click on the Save button to save the data.

The details on how to fill/edit the other fields of the calibration activity can be found in the Editing calibration activity data section.